Siding Repair on a Bend OR Home with Serious Storm Damage

Here's what we were working with - multiple sections of vinyl siding completely blown out, exposing the house wrap and framing underneath. That kind of open gap isn't just an eyesore. It's a direct entry point for moisture, pests, and cold air. Left alone, what starts as a siding problem turns into a rot problem, and that's a much bigger bill.

The damage ran along the upper band of the exterior, right below the roofline. Multiple panels had torn away or cracked badly enough that the underlayment was fully visible. We also flagged some additional wear spots on the lower wall sections that were worth addressing at the same time - that's just how we operate. If we're already out there, we'd rather catch things early than have you call us back in six months.

Vinyl siding repair on a home like this comes down to matching the profile correctly and making sure new panels lock in tight with no gaps at the seams or edges. A sloppy repair leaves you with the same vulnerability you started with. We take the time to fit everything properly so the finished wall is solid and weather-tight.

The after speaks for itself. Smooth, consistent panels across the full repaired section - no exposed sheathing, no loose edges, nothing for wind or water to get under. The home is buttoned up again and protected the way it should be. For homeowners in Bend, where wind events can be hard on older siding, catching and fixing damage like this quickly makes a real difference.